THESIS TITLE
Dynamic Analysis of Single Walled Carbon Nanotube based mass sensor
DEPARTMENT
Mechatronics Engineering
QUALIFICATION
Ph.D.
EMAIL ADDRESS
anandjoshi@gcet.ac.in

Profile

Dr. Anand Y Joshi is currently working as a Professor in Mechatronics Engineering Department at G.H.Patel College of Engineering & Technology, Vallabh Vidyanagar, Gujarat, India. He completed his Ph.D. in the year 2011 from Mechanical and Industrial Engineering Department, Indian Institute of Technology Roorkee. His research areas include Areas of vibration, nano biosensors, nanomechanics, fracture mechanics, computational mechanics, functionally graded material, carbon nanotubes, Optimization, Finite Element Analysis etc. He has to his credit more than 50 publications in various Journals and conferences of high repute including one of his articles published by Nature India and an article published in a Journal, Physica E: Low dimensional systems and Nanostructures, Elsevier Publishers, being Cited as one of the Top 25 hottest articles of the Journal and the Most cited article of the Journal since 2008. He has been the recipient of a number of Research Grants of more than Rs. 25 Lacs, including the start-up research grant which is awarded to Young Scientists below the age of 35 years by Department of Science and Technology, Govt. Of India, New Delhi for his project on Computational Investigation of Dynamic Characteristics of Carbon Nanotubes for Atomic Scale sensing of Objects. His overseas presence includes

  1. Scientific Committee member, 8th International Advances in Applied Physics & Materials Science Congress and Exhibition” (APMAS2018), which will be held between 24-30 April at Oludeniz, Fethiye/Mugla-TURKEY.
  2. Technical Committee member for the International symposium on Surfaces, Coatings and Interfaces, January 26-28, 2018 to be held at Malaysia
  3. International Technical Programme Committee member for the The Third International Conference on Advances in Sensors, Actuators, Metering and Sensing, ALLSENSORS 2018 March 25, 2018 to March 29, 2018 – Rome, Italy
  4. Editorial Board Member for the International Journal of food and Biosystems Engineering, ISSN: 2408-0675, Supported by Technological Educational Institute of Thessaly, The Technological Research Center of Thessally and the Laboratory of the Food and Biosystems Engineering of TEI of Thessaly, Greece.
  5. International Technical Programme Committee member for the The Second International Conference on Advances in Sensors, Actuators, Metering and Sensing, ALLSENSORS 2017 March 19 – 23, 2017.
  6. International Conference Scientific Committee member for the 3rd International Conference on Food & Biosystems Engineering FaBE 2017, Rhodes island, GREECE, 1 – 4 June 2017.
  7. International Technical Programme Committee member of the 2nd International Conference on Sensors and Electronic Instrumental Advances (SEIA’ 2016) 22-23 September 2016, Barcelona, Castelldefefs, Spain. (vii) Scientific Program Committee member of the International Academy of Industrial, Mechanical and Aeronautical Engineering., IAIMAE.

Teaching Experience

16 years 1 months

Current Activities

Teaching UG/PG students of Mechatronics Department

Convener

Training and Placement, Member

Syllabus Committee, GTU

Prinicpal Investigator in a GUJCOST Minor Research Project.

Specialization Areas

Vibration, Nano biosensors, Nanomechanics,

Fracture mechanics, Computational mechanics,

Functionally graded material,

Carbon nanotubes, Optimization,

Finite Element Analysis


Subjects Taught

Under Graduate


Automated Manufacturing – I

Automated Manufacturing – II

Computer Aided Design

Finite Element Method

Production Optimization Techniques

Manufacturing Processes – I

Mems And Nanotechnology

Post Graduate


Finite Element Procedures In Engineering

Fundamentals Of Micromechatronics Systems

Simulation & Modelling

 

RESEARCH PUBLICATIONS

1Research Highlights (Nature India), National Journals
39International Journals
11 International Conferences
5National Conferences

Download PDF

 

Resume

/My entire career

Education
2011

Ph.D.

Indian Institute of Technology, Roorkee, Uttarakhand

Vibration, Carbon nanotubes, nano sensors

PG (M.E.)

M.S. University of Vadodara, Gujarat

Production Engineering with 68%

2002
2000

Graduation(B.E.)

Bhavnagar University, Gujarat

Mechanical Engineering with 79.13% (Gold Medalist)

Experience
PRESENT

Professor

G H Patel College of Engineering & Technology, Vallabh Vidyanagar, Gujarat.

02/07/2012 to till date

Associate Professor

G H Patel College of Engineering & Technology, Vallabh Vidyanagar, Gujarat.

01/07/2010 to 01/07/2012

2012
2010

Assistant Professor

G H Patel College of Engineering & Technology, Vallabh Vidyanagar, Gujarat.

01/07/2007 to 30/06/2010

Lecturer

G H Patel College of Engineering & Technology, Vallabh Vidyanagar, Gujarat.

02/07/2002 to 30/06/2007

2007
End

SUPERVISION OF THESIS (Ph.D. : 01 Completed, 04 Ongoing,  M.E. : 07 Completed)

Ph.D. THESIS (Completed) : Dynamic Analysis of Double walled Carbon Nanotube based mass sensor. YEAR-2013-2016
Mr. Ajay M Patel.
Ph.D. THESIS (Ongoing) : Carbon Nanotube based sensors - YEAR 2015-continued .
Mr. Minesh Patel.
Ph.D. THESIS (Ongoing) : EEG and EMG system based Brain Computer Interface - YEAR 2015-continued.
Mr. Prashant Parmar.
Ph.D. THESIS (Ongoing) : Experimental Investigation and Microstructure characterization of hard to cut materials using PMEDM - YEAR 2015-continued.
Mr. Ayanesh Y Joshi .
Ph.D. THESIS (Ongoing) :Friction stir welding of aluminum alloys using additional heating And cooling approach- YEAR 2016-continued.
Mr. Kapil B Pipavat .
M.E. THESIS : An Experimental Study of Bone to Investigate Mechanical Properties Using Air as Coupling Medium - YEAR 2012-2014
Mr. Amit Patel.
M.E. THESIS : Optimization of process parameters of Powder Mixed Electro Discharge Machining (PMEDM) process for Ti-6Al-4V alloy using Response Surface Method. - YEAR 2013-2015
Mr. Nipun Gosai.
M.E. THESIS : Optimization of submerged arc welding process parameters using Genetic Algorithm for ASME SA516 Grade 70 steel - YEAR 2013-2015 with other supervisor Dr.Sanket Bhavsar.
Mr. Jignesh Hathiwala.
M.E. THESIS : Active Vibration Control of a Spaceborne system. - YEAR 2014-2016 with other supervisor Dr.Sanket Bhavsar.
Ms. Pujita Bhatt.
M.E. THESIS : Design and development of Deformable mirror for space telescope. - YEAR 2014-2016
Mr. Krunal Mishra.
M.E. THESIS : Design and Development of control system for walk & roll rover . - YEAR 2015-2017
Mr. Purav Soni.
M.E. THESIS : Design of active refocusing mechanism for space borne telescopes . - YEAR 2015-2017
Mr. Piyush Gopani.

INFORMATIONS

 

Sr.

No.

Topic AT For Date
1 Tools for making and characterizing nanostructures Parul University, Vadodara GUJCOST sponsored one day seminar on “Recent trends in Nanotechnology” 10th March 2018
2 Micro Electro Mechanical Systems GIT, Bhavnagar IEI Sponsored One day Workshop on Micro Electro Mechanical Systems 05th January 2018
3 Carbon Nanotube and its applications CITC, Changa GUJCOST sponsored two days’ workshop on “Recent Trends in Advanced Nanomaterial: Synthesis and Characterization” 15th February 2017
4 NanoResonators SSEC Bhavnagar TEQIP-II Sponsored One week STTP On TECHNOLOGICAL ADVANCEMENTS IN MECH. ENGINEERING 6th February 2017
5 Micro Electro Mechanical Systems CITC, Changa Mechanical Engineering Students 9th September 2016
6 Importance  of Research in Engineering G.H.Patel College of Engineering & Technology, Vallabh Vidyanagar IEEE workshop on Research Presentation and writing skills 3rd August 2016
7 Application of Carbon Nanotube based resonators Faculty of Technology & Engineering, M.S.University                  of Vadodara National Conferece on Design analysis and optimization                    in Mechanical Engineering, DAOME – 16. 18-19

March, 2016.

8 Importance of Research ITM Universe, Vadodara One day workshop on Carrer Prospects 17th February 2016
9 Importance of Computer Aided Design and Finite Element Methods in Engineering G.H.Patel College of Engineering & Technology, Vallabh Vidyanagar ISTE Certificate Course on Fundamentals of Mechatronics Engineering 03rd January 2015
10 Dynamics of Carbon Nanotubes G.H.Patel College of Engineering & Technology, Vallabh Vidyanagar ISTE STTP on Dynamic Analysis of Mechanism and Machine 07th January 2015
11 Applications and Analysis of Nanomaterials CSPIT, Changa ISTE STTP on Advances in Materials Processing 31st

December 2014

12 Diagnostic Applications of Carbon Nanotubes LDRP          Institute          of Technology and Research STTP on Diagnostics and Structural Health Monitoring of Machine & Mechanism 20th February 2014
13 MEMS and Nanotechnology Academic Staff College, Sardar Patel University, Vallabh Vidyanagar UGC sponsored Refresher Course on Design and Manufacturing 30th December 2013

INVITED REVIEWER OF THE FOLLOWING JOURNALS


Journal of Nanotechnology in Engineering & Medicine : American Society of Mechanical Engineers (ASME)

Sensors & Actuators A . Physical : Elsevier Publishers

Journal of Mechanical Science and Technology : Springer

NANO: World Scientific Press

Composite Part B : Elsevier Publishers

Computational Materials Science : Elsevier Publishers

Journal Of Sound and Vibration : Elsevier Publishers

Mechanics  Research Communications : Elsevier Publishers

Sensor Review : Emerald Publishers (United Kingdom)

Mechanics of Advanced Materials and Structures : Taylor & Francis

Current Nanoscience : Bentham Science Publishers.

Journal of Vibration & Control : SAGE Publishers

International Journal of Mechanical Science, Elsevier Publishers

International Journal of Acoustic and Vibration

G.H.Patel College of Engineering & Technology, Vallabh Vidyanagar, Anand

Period Designation Nature of Responsibility
2011 – continued Professor Incharge Training & Placement Arrange campus for students
2008-2009 Time Table Incharge Responsible for coordinating and preparing time table of faculties of the department and the institute.
2006-2009 Incharge of the Computer Aided Design and Robotics Laboratory Responsible for conducting workshops for students in the respective subjects.
2004-2007 Industrial visits Incharge Responsible for arranging visits and project trainings in Industries for students.
2003-2006 Faculty Advisor, ISTE Students Chapter. Responsible for managing activities of student’s under ISTE.
2005 Anti Ragging Squad (Member) Coordinating the anti ragging activities in the institute
2003-2004 Member of the Credit System Member of the credit system committee

Experimental Investigation to Study the Effect of Micro Coated Tool on the Surface Topology of Hard to Machine Materials


Principal Investigator:

Dr. Sanket N Bhavsar, Dr. Anand Y Joshi

Co Investigator : Dr. Ajay M Patel

Duration : 2 Years

Amount : Rs .470000

Funding Agency : GUJCOST

 

Computational Investigation of Dynamic Characteristics of Carbon Nanotubes for Atomic Scale Sensing of Objects


Principal Investigator:

Dr. Anand Y Joshi

Duration : 3 Years

Amount : Rs .1884000

Funding Agency : DEPARTMENT OF SCIENCE & TECHNOLOGY